A driving recorder is already an essential tool. In today's society, malicious intentions are frequently encountered, and without a driving recorder, it's hard for even ten mouths to explain. Buying a driving recorder at a 4S store costs several hundred yuan each. And car owners who don't know how to install and wire their own cars would rather spend extra money to avoid trouble.

Let's discuss how to install a driving recorder. Before installing the device, we need to know the precautions for buying a driving recorder. The primary consideration should be to connect to electricity. Connected to the front row, the power cord should be at least 3 meters long. Assuming connected to the rear row, the power cord should be at least 4 meters long. In addition, purchasing memory cards is also very important, and it is necessary to inquire with customer service before placing an order, so as to avoid many troubles.

Pay attention to the correct orientation when installing. The driving recorder should be installed on the right side of the rearview mirror as much as possible, which will not obstruct the view and can take photos to the fullest extent, playing a good role. After purchasing a suitable driving recorder, you can start installing it. Firstly, we need to wrap the wire around the rearview mirror a few more times to avoid it falling off.

It can also avoid secondary injuries caused by the driving recorder hitting the passenger's face due to power during accidents. We need to tidy up the remaining wires or stuff them into the gaps. The wiring operation is basically completed when the other end of the wire is plugged into the cigarette lighter. Assuming the line is too long, you can fix it with tape and remember not to let it fall apart.